|
ATE
We recommend using ATE equipment,
based on our regular use of them as car technicians. ATE tools will
help you to save time, money, manpower and facilitate brake system
tasks.
30-liter electric brake bleeding unit FB 30 EDR
Order no.:
03.9302-3000.4
740273
The ATE FB 30 EDR is an electrically operated bleeding unit using
ATE brake fluid cans of 5, 12, 20 or 30 liters capacity. The cans
are mounted directly in the unit. The wide range of ATE accessories
makes it possible to fill, flush and bleed all hydraulic clutch and
brake systems including ABS, EDS, ESP and SBC.
The ATE FB 30 EDR is fitted with an electronic pressure control
facility (EDR) with preset pressure levels of 0.4 bar, 1.0 bar and
2.2 bar (suitable for all applications). The selected pressure is
maintained at a constant level under all operating conditions by the
electronic control system, this can be checked with the integrated
manometer.
The brake fluid level in the can is monitored by a float switch. If
the level falls too low, the float switch switches off the pump and
a clear acoustic signal is sounded. This means that no air is drawn
in and the user is informed when the can is empty.
The ATE FB 30 EDR also allows modern, low-viscosity brake fluids to
be used (in particular ESP brake fluids). All the operating and
monitoring controls are clearly and ergonomically arranged on the
tilted front panel of the unit.
To allow it to be moved easily, the ATE FB 30 EDR has large wheels
and a convenient steering handle. Holders for the filling hose and
power cable are provided on the sides of the unit.
The ATE FB 30 EDR also features a practical storage tray for small
components.
It goes without saying that all materials used on the FB 30 EDR are
completely resistant to brake fluid.
The most up-to-date technology means that the ATE FB 30 EDR is
ideally equipped for today's and tomorrow's fields of application.
Benefits:
- Brake fluid container can be used directly without being refilled
- Versatile, suitable for various container sizes / shapes from 5-30
liters
- Absolutely constant working pressure thanks to electronic pressure
control (EDR)
- Automatic cut-off with acoustic warning if the can is empty
- Suitable for low-viscosity brake fluids
Scope of supply:
- Complete unit (without brake fluid cans)
- Adapters for connecting the unit must be ordered separately
- Operating instructions
Digital brake disk caliper gauge
Order no.:
03.9314-0010.3
760138
The digital ATE brake disk caliper gauge is an indispensable tool
for precisely determining brake disk wear. It enables quick and easy
measurement of brake disk thickness, i.e., the degree of wear. The
measuring range is 125 mm and the length of the measuring jaws is 85
mm. The design of the measuring jaws permits exact measurement even
if the disc has a ridge.
Work with the digital ATE brake disc caliper gauge couldn't be
easier. After the measuring jaws have been positioned on the brake
disk, the result of measurement is shown in figures on the display.
The reading is saved by briefly pressing the hold button. The
caliper gauge then can be opened and removed from the brake disk.
The reading remains saved until the hold button is pressed again.
This is a big advantage especially if accessibility is a problem or
poor lighting conditions in the wheel well impede reading. The
result of measurement thus can be conveniently read and compared
with the desired value.
If required, null balancing of the gauge can be quickly initiated at
the push of a button. The user can freely choose between “mm” and
“inch” as units of measure.
The big advantage of the digital ATE brake disk caliper gauge is
that no special know-how is required for taking readings. The
digital reading display is self-explanatory even to laypersons and
can be nicely used for sales talks with the customer.
The digital ATE brake disk caliper gauge is an indispensable tool
for precisely determining brake disk wear. It enables quick and easy
measurement of brake disk thickness, i.e., the degree of wear. The
measuring range is 125 mm and the length of the measuring jaws is 85
mm. The design of the measuring jaws permits exact measurement even
if the disc has a ridge.
Work with the digital ATE brake disc caliper gauge couldn't be
easier. After the measuring jaws have been positioned on the brake
disk, the result of measurement is shown in figures on the display.
The reading is saved by briefly pressing the hold button. The
caliper gauge then can be opened and removed from the brake disk.
The reading remains saved until the hold button is pressed again.
This is a big advantage especially if accessibility is a problem or
poor lighting conditions in the wheel well impede reading. The
result of measurement thus can be conveniently read and compared
with the desired value.
If required, null balancing of the gauge can be quickly initiated at
the push of a button. The user can freely choose between “mm” and
“inch” as units of measure.
The big advantage of the digital ATE brake disk caliper gauge is
that no special know-how is required for taking readings. The
digital reading display is self-explanatory even to laypersons and
can be nicely used for sales talks with the customer.
Benefits:
- Convenient, reliable reading of measurements
- Easy saving of readings
- Measuring jaw design permits accurate measurement even if a brake
disk has a ridge
- Sturdy design suited for workshop use
Scope of supply:
- Complete instrument in sturdy plastic box
- Substitute battery
- Operating instructions |
